Left arrow Go Back

Speech by the Hon. Censu Galea, Minister for Competitiveness and Communications at the inauguration of the Malta Standards Authority National Metrology Services – Kordin Business Incubation Centre, Paola – 12 June 2007

PR0867
Date Icon 12/06/2007

Dear Prime Minister, Chairman, distinguished guests,

Our government has invested in total €313,000 in the refurbishing requirements for Malta Standards Authority National Metrology Services (MSA-NMS) in its two phased development programme (Lm100,000 (233,000 euros) phase 1; 2004; Lm35,000 (81,528   euros) in phase 2007). All this to accommodate metrology equipment tendered to the tune of €939,000 of acquired funds for metrology through pre-accession and transition facility funding (500k + 439k euros). 

MSA-NMS has in the last year alone produced a staggering 500 calibration certificates, merit of a dedicated and technically competent staff. In excess of 400 calibration certificates had been issued in 2005, and a client base of over 90 clients has been built up from its start-up in 2004.

Year on year approximately 35% of work volume is generated through new business sources annually with an approximate 30% increase in volume of calibration services annually. This it does by work it carries out for government, its entities, labs and manufacturing and services industries, which result in the saving of thousands of Liri which would have otherwise gone abroad.

The National Metrology Services have reached an income level close to €65000, in 2006 building year on year in the volume and income generated through its metrology function. The Metrology Services have surpassed growth levels forecasted at start-up to be attained in 6 years at the three year mark.

MSA-NMS forms an important link in providing accreditation laboratories with the necessary local traceability, thereby ensuring contained costs and making accreditation possible to allow them to open up their markets.

The availability of locally available measurement capability of this level allows other enforcement agencies to attain the right traceability and calibration requirements necessary in carrying out their enforcement roles ex: health inspectorate

MSA-NMS also provides calibration training in mass measurement and has developed courses for temperature measurement work. This knowledge transfer assists industry in reducing calibration costs both through local traceability and through technology transfer of the best internal calibration systems to use.

The Directorate conducts a high percentage of work on site at clients which includes tasks such as mapping of stability chambers, auto claves, cold room, mobile refrigerators, ovens, large capacity weighing systems and weighbridges. For the latter MSA-NMS has also purchased a 12m low loader tri axle trailer for use in the calibration and verification of these large weighbridge systems.

A significant volume of work stems from the pharmaceutical industry, and the work volume by field is subdivided as 55% temperature, 5% dimension, 40% mass. The areas of operation range for mass calibration from 1mg to 1 Tonne. Dimension Block gauge measurement up to 100mm and temperature sensor calibration from –80°C to 550°C –and reference humidity measurements.

The pragmatic no nonsense development of our National Metrology Institute  have turned it into a  reference point for other small NMI’s both in Europe, the new European affiliates and the Balkans as an example to emulate, making the best use of monies given delivering all project objectives consistently and completely.

The in house technical competencies have been attained through EU sponsored training with leading European National Metrology Institutes namely, PTB Germany, NML Ireland, NPL United Kingdom, INRIM Italy, INTA Spain, DFM Denmark

To ensure sustained competency we encourage MSA-NMS’s active participation in the European Forum of National Metrology Institutes – EURAMET as a means of forwarding Malta as the right place to invest.

The national metrology services also conduct collaborative work with Heritage Malta, and has carried out a mapping study for temperature and humidity at the level one Hal Saflieni Complex and is currently working on a joint project with Heritage Malta to acquire EEA funding to install a network of temperature and humidity sensors for remote monitoring of the site. MSA-NMS is the technical advisor to Heritage Malta on this project.

The Directorate assists the Malta Resources Authority (MRA) in the area of fuel verification and is to be nominated by this same authority for the field verification of Maltese forecourts in the near future and works with the ADT in ensuring the correct calibration of speed cameras and axle weighing systems.

MOU’s are in the process of being signed with University Of Malta, MRA and Heritage Malta.

MSA-NMS is strongly committed to accomplishing all its operational objectives and enhancing its measurement capabilities to service all local requirements. Given the right competencies and equipment the limits to the work possibilities are indeed wide.

The new off-shore venture with the Libyan authorities is a praise worthy initiative by MSA’s chairman and all the authority’s staff implementing gained competencies to their best use.

Share this Press Release Icon socials Icon socials Icon socials Icon socials

Other Press Releases:

PRESS RELEASE BY THE MINISTRY FOR GOZO    Infringement proceedings concerning the Finch Research Derogation

PR261965en

PRESS RELEASE BY THE MINISTRY FOR GOZO Infringement proceedings concerni...

STQARRIJA MILL-MINISTERU GĦAL GĦAWDEX   Proċeduri ta’ ksur dwar id-deroga għar-riċerka dwar l-għasafar tal-għana

PR261965

STQARRIJA MILL-MINISTERU GĦAL GĦAWDEX Proċeduri ta’ ksur dwar id-deroga g...

More Press Releases Right arrow